Nearly done....

Have a few things to do now that the seals are installed, aside from tires the car needs to be aligned, the dash and under dash panels need to be installed and then fettled.  The doors do not fit as nice as they did when there were no seals limiting their closure but I'm hoping that once they have a chance to warm up and spend a little time together they'll settle in so to speak.  

Safety wired the front radius arm bolts today tomorrow I may try to align the wheels, got an idea on how to do the toe in with a lazer line.  Stay tuned and I'll let you know.  Need to quit now and go shovel snow....

Cheers,

2 hrs

And now the drivers side...

Working on the drivers side, tasks are coming to a close with the sub zero weather and no tires....

I think I'll send RJ home next week and wait for nice weather to do the 'fettling' after we have tires.

Wonder what the deal is with the cracks that seem form in this spot on either side, must be related to the window frame  which the OTS doesn't have?

Welded back up

Door on, working on fitment...

Aside from reinstalling the dash top, I should be pretty much done till I can fettle and tune the car,  I'm a little worried about the clutch but will have to see when we can start driving RJ.

My next project will be either to finish the 4.2L engine or work on my '73 and see if I can fix the oil leaks and power steering....Haven't decided if I'll continue the blog since the purpose of this was to keep Michelle up to date on RJ's progress.

Cheers,

4 hrs

Replacing weather stripping/seals.

Mostly photos today, was able to get a few hours in between family comitments.

Plastic sheeting bing installed, was missing and resulted in some damage to the door card.

Door card installed, had to move the chrome strips for a good fit

Condition of the old weather stripping

Removed old, cleaned track for new one, second side was easier than the first, the chrome post doesn't have to come out to install the weather strip

Removing the drivers door, can't get to the weather stripping with the door in place.

Protecting the car with padding and tape while working with the door and weather stripping glue

Condition of the seal behind the front of the door

Needed to glue and clamp the chrome 'dog leag on the passenger side windscreen, I think it would have blown off it was so loose.

The new seals are installed, need to put the door back on and the innards back in it.

Cheers.

4.5 hrs

TGIF

I thought I was going to get going on the left side today but ran into some other issues, a crack in the door that had to be welded up, a window that wouldn't go all the way up or all the way down (not much point to new seals if you can't wind the window up) and all the tasks in between point A and point B.

Something had happened here where the window track had been brazed resulting in poor fitment of the last screw seen to the right (cockeyed) and the spot welds were broken at the seem just to the right of the oblong hole.  

The area cleaned in preparation for welding, used a screw to clamp the pieces together.

Just a reminder of where the wires went since I was disconnecting the generator and regulator from their leads,  have heard that welding could damage those parts ( I think that was related to the possibility of burning out diodes in an alternator but since I wasn't sure...)

Removing the glass from the door so as to be able to get to the 'squeegee' window seal and to try to figure out why the window wouldn't roll all the way up.

Cleaned window winding mechanism, now lubricated as well.

Have no idea why I took this one, getting the window out was a challenge, was afraid the glass was going to break but after removing the window winder and the 4 nuts to the left of it was able to pull it all out with some wiggling on the way.

Welded up corner, installing the window and frame

Now ready to cover the door, what I thought I would be doing this morning. Fits much better, window rolls up and down, moves easily and the new seal fits much nicer (painted under the seal with touch up paint (close but not perfect and will get a color match for other touch ups-still much better than the white showing IMO)

Called Eurotire today and placed a back order for Vredstein tires. That's it for this week, have a great weekend!

Cheers,


8 hrs

Ground Hog Day?

Like the movie of the same name with Bill Murray it seemed like today was a repeat of yesterday and likely what tomorrow and the next day will bring.  

This is the door limiter, I don't know what they called it but it keeps the door from opening into the body, as you can see this is about to fail, I welded the one on my car and it has held up for several years so figured that I ought to try it on this one too.

Fitting the rear quarter window was a bear, holding the glass in place working around the seal trying to put the spacers in position and starting the screws... talk about needing a third hand!

This is how these cars were likely assembled,  pop rivet didn't catch, don't worry about it, there's two more.

This is how it should have looked, no gap and door should fit and seal better.

Cleaning the track out for the new seal, tape to protect paint from glue and chipping while reinstalling the door, a tip, install the limter spring (below)  on the hinge before installing and aligning the door...

Lousy welder...

but has a good grinder

Done for the day, door on, adjusted and ready to go on to other side tomorrow,  door will have to be adjusted for fit after weatherstripping has 'laid' down.

Cheers,


6 hrs